Page 4/13
Q
UESTIONS
?
Phone 1.800.236.2812 Email ARQIP@request.com
WWW
.
REQUEST
.
COM
8) Open Viewport and select File Transfer
Send Webpages…
9) Choose the options to Transfer Entire Project to Internal Flash and click OK
10) It will prompt you to select the main page. Click OK and navigate to the directory
where the XPANEL project is saved. Open the folder named
econtrol2_arq_4_0_2.xweb
11) Select the file called Main.html and click OK. This will upload the project to the
control system.
Configuring the SIMPL Project for
eControl2:
1) Open the “Single Zone v4_0_2 Demo.smw” project
2) Switch to Configure view
3) Under Ethernet Units in the System View, right-click the eControl PC Interface
and select Configure
4) Select the IP Net Address tab
5) Enter the same IP ID and IP Address used in steps 4 & 5 under Configure the VT-
Pro XPANEL for eControl2 above
6) Select OK
7) Compile and Upload the project
8) Connect to the Crestron Processor with Internet Explorer to verify that it works
Feedback State Memory:
In our continuing effort to eliminate common problems, ReQuest proudly announces the
addition of Feedback State Memory. The first time you connect to the AudioReQuest
serially through Crestron, a connection string is sent that tells the ARQ in what format you
would like the data to be sent (typically Compressed GUI data with Constant Player
Feedback and Elapsed Time ON). Any subsequent time you connect, the ARQ will
remember the feedback format you had previously requested and use that. Even after you
disconnect the power, such as in the event of a power outage, the AudioReQuest will
remember your previous feedback state and send text to the touchpanel without you
needing to resend the connection string.
NOTE: It is still recommended that you tie the ARQ-CONNECT signal to the
AudioReQuest source button on your panel to avoid any potential problems.
One-Way Serial Control:
AudioReQuest can be controlled by only sending serial commands to it. This is useful for
interfacing to control systems that don’t use any feedback, such as keypads and one-way
remote controls like the wireless Crestron ST touch panels.
Single Button Interface Examples:
a. Next Playlist (requires 1.7.0 or higher)
When the button is pressed, the AudioReQuest will cycle through the available
custom Playlists like tuner presets. It will automatically return to the first Playlist
after the last Playlist is reached.
[NEXT-PLAYLIST (0x30,0x9E)]
b. Next Genre (requires 1.7.52 or higher)
If your end-user prefers to have access to Genres instead of custom Playlists,
consider using the Next Genre command. This ensures that any songs that are
added to the system are automatically available without the user having to add them
to a Playlist. Plus, no initial setup is involved, since the AudioReQuest automatically
categorizes the music.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern