pro2_av2_cp2_cp2e_rack2_pac2_4.003.0015.txt
the user name or the password which would cause a crash.
- Fix issue with out of bounds parameter access reporting the 0 based index
rather than 1 based (i.e. declaring xyz[5] and accessing xyz[0] will report
index=-1, bounds=4 rather than index=0, bounds=5)
- Resolved the issue with the memory corruption found with the C2VEQ4 driver.
This would cause processors with these cards reboot after some period of time'
- Fixed the PAC2 hub so that it will not revert to the backup Cresnet when a
large program was restarted.
- Resolved the issue where Direct Sockets would reboot the controller if
Ethernet was not enabled.
- Resolved the issue with the MPS IR where a single PULSE could be repeated
multiple times.
- Add "-I:" parameter to IPTABLE command so a specific IP ID can be queried in
the table.
- Added new console commands to set the DHCP Discover option to be either
HOSTNAME or the FQDN. Also for the FQDN added an option whether we want to
send out the domain name or not. The default option is the hostname
- [IM-RX Only] Added debouncing for the volume going to 0 on the IM.
- [IM-RX Only] Resolved the issue on the IM-Rx with the audio just dropping out.
- Add changes for not writing the domain name to the EEPROM when we are in the
DHCP Mode and we get the domain name from the DHCP server.
- Modified the printing of the domain name. EEPROM command prints the value
stored in EEPROM. ESTATUS prints out the current domain name.
- Corrected an error where the ID printed in the "timeout timeout" message was
in decimal not hex.
- Added compatibility with Loriat for accessing the interface table.
- Corrected issue with initialization of string parameter arrays where if the
SIMPL symbol wasn't sized to the max # elements in the array, you would get an
error for each access beyond the end of the symbol wrapper, i.e. "Error:
Module S-1 : S2_mult_serial_send at line 1001: Parameter Array overflow, Index
- [IM-RX Only] Fixed composite video issue found in 4.000.0226.
- Corrected lost button releases for transmitters on 1 Way Gateways under
heavy system load conditions.
- Improved EISC stability.
- Fixed an issue where connecting with the SysInfo page of the Toolbox while
the program was starting up would cause the program to operate incorrectly.
- [MC2W Only] Fixed a problem on an MC2W where the RF gateway is unresponsive once
we restart the program.
- Fixed a problem with any plug in cards not working (Rx not working on the
C2COM3 card) once we exit the PASSTO mode (i.e. loading a TPS touchpanel over
Cresnet)
Build: 4.000.0226
January 20, 2006
- Added support for SNMP v1,v2 and v3.
- Added support for SIMPL+ direct socket access.
- Added support for SIMPL+ dynamic arrays and strings.
- Added support for SIMPL+ functions for managing Ramp Control Blocks (RCBs)
- Added multicast and broadcast receive functionality.
- Added Ethernet watchdog, which improves overall Ethernet performance on busier
networks.
- Fixed an issue where the BUFFER_INPUT overflows in SIMPL+ were not flagged as
errors. This change may cause errors to be generated in programs that
previously had none.
- Extended SIMPL+ Memory on Pro2, MP2, QMRMC(RX) lines.
- Fixed and added several console commands, please refer to new 2-series reference
guide.
- Fixed an issue that occurred when sending data to a UDP device after it was
disabled.
- Fixed the cause of the error message "Could not obtain TxMutex(-51)".
- Resolved several Update Request issues.
- Now display a message to the front panel of OOTBF processors when the
Page 2
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern