pro2_av2_cp2_cp2e_rack2_pac2_4.003.0015.txt
rebooted.
- Eiminate the "No parent or driver for Slot-xx" message that was seen when
restarting a program that had a slave 2-series processor.
- Fixed buttons 25 and 32 to function correctly on the CNWP32 and the CNPI-48.
- Fixed crash when reporting invalid format in an SDPM symbol (Serial to
Indirect Text).
- Corrected a bug in generating a Certificate Signing Request (CSR) that
caused Thawte to reject our CSR.
- Fixed a bug that cause the error about "CheckForDisk: Not a file User" to
appear after several program loads or resets.
- Made changes to the new Simpl+ scheduling algorithm to improve simultaneous
multiple file access. Changes will be transparent for properly constructed
programs.
- Added commands COPYFILE & MOVEFILE.
- Modem Operations:
- Send out modem init string to the serial console & wait 3
seconds only if the modem init string is enabled (console commands that
can change both).
- Add the following commands that are ignored in even they come in from a
modem connection: +++, ATDT, BUSY, CONNECTED, ERROR, NO (as in "NO
CARRIER"),
OK. These are in addition to pre-existing RING comand.
- MODEMINITSTRING command to change the default modem init string that is
sent out of the serial console port at startup. Defaults to "AT\r"
- SENDMODEMINITSTRING command to turn on/off sending of the modem init
string & subsequent delay at startup.
- Fixed a bug with the free commands (FREE, RAMFREE, HEAPFREE) where negative
number could be displayed.
- Suspend program will throw away serial data coming in (offline modes like
loading a touch panel).
- Real time cardID read added to "show boards"
Known issues:
- The C2VEQ-4 card does not work in slots 15 & 16 of a Rack2. The card needs
a modification at the factory for this to work. It does work in other slots
however.
Build: 3.117(Release)
Mar 24, 2004
- Fixed a bug in the real-time clock code that caused a deadlock when a DST
changed occurred.
- Corrected a problem with OSC/VOSC where if high or low time = 0, use 1 tick.
Prevents system from getting caught up in the logic process forever and having
an unresponsive console, etc.
- Fixed a crash that occurred using the Simpl+ FileDelete("*.*") from the root
directory.
- Corrected a problem where the Rack2 did not report having a LCD front panel
in the INFO command. That lead to Viewport not allowing the user to set the
front panel password.
- Exposed the following commands: SDEBUG, SHOWEXTRAERRORS, & USERPROGCMD.
- Fixed a bug where, even though a user password had been set up to protect
the web pages, the user was allowed to enter a blank password and get in if
the console (admin) password had not been set. However, the user names USER
and ADMIN are now MANDATORY when typing in the password in the browser dialog.
USER will access the program (eControl) pages and ADMIN will allow access to
the setup pages. User names are not case sensitive but passwords are.
- Fixed a problem where multiple SSL connections would cause a SW watchdog
Page 7
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern